TFSN-912 has 9 needles, 12 heads, flat bed, color LCD panel, thread break detection, 1000 spm, power failure control.
Give Us A Call For Personal, Knowledgeable Help!
Tajima TFSN-912 9-Needle 12-Head Flat Bed Embroidery Machine.
The Tajima TFSN-912 has all the latest technology, high quality, and cost reduction for high value production.
Tajima TFSN-912 Key Features.
Color LCd Monitor.
A 12.1-inch color LCD monitor with exclusive graphical user interface and touch panel improve operational convenience. A 32-bit CPU increases image rendering speed (improved by 80% compared to conventional products).
Thread Breakage Detection.
A new electronic sensor monitors thread movement at all times. If the upper or lower thread is broken, it is detected in an instant and stops stitching to prevent production from continuing with broken thread. Sensitivity of the sensor is adjustable on the operation panel.
Thread Take Up Spring.
The thread take-up spring picks up excess thread and stabilizes the balance of upper and lower threads at high speed and improves thread tension. Thread breakage due to extra-fine satin stitches (2mm or less), needle tip or thread untwisting, etc. has been reduced 30% - 50% compared to conventional designs. Productivity has been drastically improved.
Spiral Tube, Take Up Lever Guard.
Spiral tubes between the upper thread course stand and individual tension base protect the upper threads from environmental wind, a breeze caused by an air conditioner, etc. that would cause thread tangling.
In addition, specially developed covers are mounted over the take-up levers to prevent threads from being tangled during high speed operation and to improve safety in the work area.
Tajima TFSN-912 Features.
User-Friendly, Quieter Operation.
Latest noise reduction developments help create a quiet and pleasant working environment for operators.
Standard memory capacity : 2,000,000 stitches to register Max. 99 designs.
Stitching conditions (design start position, color sequence etc.) can be output to a floppy disk along with the design data. The saved stitch conditions reduce setup time.
Scale Up / Down, Rotate.
You can scale your designs down to 50% or up to 200% in increments of 1%, and rotate in 1-degree increments.
A design can be automatically repeated up to 99 times both vertically and horizontally. The repetition can be set for continuous operation.
Modify, insert or delete your embroidery design data stitch by stitch.
Satin Stitch Length Compensation.
The embroidery finish of satin stitches may sometimes differ in values, compared with original design data due to the embroidery conditions like very stretchy fabrics. Satin stitch length can be increased or decreased for compensation with ease on the operation panel.
A simple setting on the operation panel removes unnecessary fine stitches (0.5mm long or less) contained in the design data. Removal of these fine stitches will reduce undesired thread breakage that leads to decreased production due to machine downtime.
Frame Back / Forward.
Frame Back / Forward is available in units of stitches, color change or designated stitch count.
Production management function.
Production management information like stitch counts of memorized designs, time required for embroidery process, remaining stitches up to preset halt (preliminarily set stop position) can be checked on the operation panel. This will help you get a better grasp of production efficiency.
Embroidery space trace function.
This function moves only the frame on the contour of an embroidery design and helps you check if a design will fit in a designed embroidery space before sewing it. This will prevent needles from hitting the frame by mistake during the embroidery operation.
The frame can be either manually or automatically returned to the design starting point (while the machine is stopped), even if the end point is different from the starting point.
Automatic Offset / Manual Offset.
Facilitates appliqué fabric placement and frame changing.
Design starting point can be easily positioned for placement of embroidery.
Automatic Upper / Under Tread Trimming Device.
Automatically operates by commands in the design data.
Power Failure Control Measures.
Even if the power supply is cut off in the middle of embroidery due to power failure or other reasons, the embroidery position is saved in memory so the machine can resume with a simple operation after the machine is reset. The embroidery process can be resumed in the position just before the power failure to save product loss.
Tajima TFSN-912 Specifications.
|Model||Needles||Heads||Head Interval||Embroidery Space Per Head|
|D x W||Continuous Design|
|TFSN-912||9||12||360||680 x 360||4,320|
|TFSN-915||9||15||400||680 x 400||6,000|
|TFSN-920||9||20||330||680 x 330||6,600|
- Stitch length.
- Ternary scale : 0.1 - 12.1mm.
- Binary scale : 0.1 - 12.7mm.
- Max. 1,000 rpm.
- Motor x 1.
- Pulse Motor x 2.
- 3-phase : 200/220/380/415V.
- 50Hz 60Hz.
- Power consumption: 1.3kw.